ProFusion System Components

iN2-DD2P

IN2-DD2P ProFusion Beverage Dispensing System

N2 and CO2 Beverages on Tap

  • Plug and play; factory assembled system.
  • The ProFusion system uses one cold keg of cold brew coffee, tea or your craft beverage of choice and dispenses two different style beverages from a single keg.
  • Nitrogenated or lightly carbonated, and Still Beverage on Tap.
  • Simple set-up: one keg connection and one gas connection.
  • ProFusion Injector equipped with two secondary regulators, feeding both the keg and injector.
  • Built in stainless steel particulate filter, 50 micron, washable and reusable.
  • Optional custom tap handles available.

Features

  • Two tap, air cooled, column tower with stainless steel faucets
  • 24″ width
  • 30.125″ depth
  • 49.25″ height*
  • ** Actual height varies depending on tap handle style
  • Weight: 174 lbs
  • iN2-2P Injector, two product device
  • N2 primary regulator
  • Available with premix tank quick connect couplers or with D style keg coupler

DD24HC direct draw cooler specifications:

  • Volts: 115VAC/60Hz/1 Phase
  • 4 AMPS
  • Certifications for DD24HC:
certifications
iN2-TK2P

IN2-TK2P ProFusion Beverage Dispensing Tapping Kit

N2 and CO2 beverages on tap

  • The iN2-TK2P tapping kit is designed to convert your existing kegorator or back bar cooler into a ProFusion beverage dispensing system.
  • The ProFusion system uses one cold keg of cold brew coffee, tea or your craft beverage of choice and dispenses two different style beverages from a single keg.
  • Nitrogenated or lightly carbonated, and Still Beverage on Tap.
  • Simple set-up configuration: one keg connection, two outlets. One gas connection feeds both the system and keg (each with their own pressure control).
  • High visibility and easy accessible particulate filter.
  • Compact, thin design that can easily fit in coolers and not take up excessive space.

Specifications

iN2-2P Specifications:

  • 10.5″ width
  • 4.5″ depth
  • 12.75″ height
  • One gas inlet, dual gas control for keg and injector pressures
  • One product keg inlet, two product outlets
  • Built in stainless steel particulate filter, 50 micron, washable and reusable
  • Must be located in a refrigerated space within five feet of dispensing tower
  • Liquid and gas inlet/outlet ports are on one side of the iN2-2P injector

iN2-V2 two tap, column tower specifications:

  • Two stainless steel faucets
  • Insulated and air cooled
  • 3/8″ barrier hoses
  • Supplied with fittings and hose kit

Tapping Kit specifications:

  • N2 primary regulator included
  • Available with premix tank quick connect couplers or with D style keg couplers
CR-1-iN2

CR-1-IN2 ProFusion Countertop System

N2 Beverages on Tap

  • Nitrogenated and Still Beverage on Tap.
  • Flash chills ambient temp keged beverages.
  • The system utilizes one keg of cold brew coffee, tea or your craft beverage of choice to dispense two different style beverages.
  • Simple set-up: one keg connection and one gas connection.
  • Integrated ProFusion injector nitrogenates the beverage at the time of dispense
  • Two on-board regulators feed both the keg and injector pressures.
  • Built in stainless steel particulate filter, 50 micron, washable and reusable.
  • Optional custom tap handles available.

Specifications

  • 50, 12oz cups per hour @<400F
  • Self-contained refrigeration system
  • Compressor: 1/5 H.P.
  • Refrigerant: R134a CFC-free
  • Operating temperature range: 400F-1000F
  • Electrical: 115VAC/60Hz/1 Phase
  • 3.4 AMPS
  • Minimum circuit breaker size: 15 amps
  • BTU: 2,200 per hour average
  • Water bath: 5 gallons
  • Ice bank: 10 lbs
  • Weight: 75
  • Cup clearance: 8.5”
  • 12.3754”W x 27.5”D x 25”H
  • *Actual height varies depending on tap handle style