Crysalli has a variety of accessories and upgrade components available. All of the parts and pieces required to complete every installation. CO2 regulators, angle stop adaptors, wall mounting brackets, filters, faucets, leak block detectors & more. Placing the remote chiller in a ventilated cabinet? Consider an air baffle and/or our thermostatic fan box to improve air flow and ventilation. Need to free up valuable floor or cabinet space? Hang the remote chiller on the wall with a wall mounting bracket. Everything you need to make the system work.
CR-14FC Water Filter System
Intended for use with CP2000 Series and CR-UCW-BH still water system. Compact size fits under the counter. Removes the bad tastes, odors, colors and particles as small as 1/2 micron, while retaining the good minerals that are essential for bottle quality tasting water.
- System features one 4FC Cartridges:
Advanced Fibredyne technology
Quick Change sanitary cartridge
Recyclable
High Capacity, Extended filter life - Manifold features water shut-off, flushing valve and water pressure gauge
- Certifications: NSF 42 Class I and NSF 53
- Inlet Connection: 3/8”
- Outlet Connection: 3/8”
- Flow Rate: 2.5 GPM
- Rated Capacity: 15,000 Gallons
- Pressure Requirements: 10-125 psi
- No Electrical connection
- 18”H x 8”W x 5.25”D
CR-14FCP Water Filter System
Compact size fits under the counter. Advanced Fibredyne media technology cartridges offer superior reduction in chlorine, taste, odor, color and organic chemicals while providing exceptional sediment reduction with resistance to premature plugging. This submicron technology is NSF certified to reduce particles as small as 1/2 micron in size which reduces health contaminants such as cysts.
- 2 stage system
- 10″ pleated cellulose pre-filter
- 4FC high capacity cartridge
- Advanced Fibredyne technology
- Quick change sanitary cartridge
- Recyclable
- High capacity, extended filter life
- Certifications: NSF-42 Class I and NSF 53
- Flow rate: 2.5 GPM
- Rated capacity: 15,000 gallons
- Inlet connection: 3/4″
- Outlet connection: 3/8″
- Pressure requirements: 40-125 PSI
- No electrical connection
- Manifold features water shut-off, flushing valve and water pressure gauge
- 14.254″ Width
- 6.13″ Depth
- 15.23″ Height
CR-24FC Water Filter System
Compact size fits under the counter. Removes the bad tastes, odors, colors and particles as small as 1/2 micron, while retaining the good minerals that are essential for bottle quality tasting water.
- System features two 4FC Cartridges:
Advanced Fibredyne technology
Quick Change sanitary cartridge
Recyclable
High Capacity, Extended filter life - Manifold features water shut-off, flushing valve and water pressure gauge
- Certifications: NSF 42 Class I and NSF 53
- Inlet Connection: 3/4”
- Outlet Connection: 3/4”
- Flow Rate: 5 GPM
- Rated Capacity: 30,000 Gallons
- Pressure Requirements: 35-125 psi
- No Electrical connection
- 19” H x 17” W x 5.75” D
CR-24FCP Water Filter System
Compact size fits under the counter. Advanced Fibredyne media technology cartridges offer superior reduction in chlorine, taste, odor, color, and organic chemicals while providing exceptional sediment reduction with resistance to premature plugging. This submicron technology is NSF certified to reduce particles as small as 1/2 micron in size which reduces health contaminants such as cysts.
- 2 Stage System
- 10” Pleated Cellulose Pre-filter
- Two 4FC High Capacity Cartridges
Advanced Fibredyne technology
Quick Change sanitary cartridge
Recyclable
High Capacity, Extended filter life - Certifications: NSF 42 Class I and NSF 53
- Flow Rate: 5 GPM
- Rated Capacity: 30,000 Gallons
- Inlet Connection: 3/4”
- Outlet Connection: 3/4”
- Pressure Requirements: 40-125 psi
- No Electrical connection
- Manifold features water shut-off, flushing valve and water pressure gauge
- 19.25” H x 21.75” W x 6” D
CR-ABUCM Air Baffle Accessory Kit
For use with undercounter models CR-UCM1 and CR-UCM2. For undercabinet mount applications.
CR-TFB1 Thermostatic Fan Box
Assists in removing trapped heat in a cabinet produced by UCM Remote Chiller. Temperature controlled fan, automatically turns itself on or off depending on cabinet temperature. Can be used with or without exterior side face plate. Made in the USA.
- Digital thermostat
- Factory set at 90°F to turn on/off
- 117 CFM Fan
- 120 volt. 7′ electrical cord and plug
- Max amps: 0.5
- 4′ temp probe cord
- Overall dimensions:
- 9.5″ Width
- 3″ Depth
- 7.875″ Height
- Exterior side face plate:
- 9.5″ Width
- 7.875″ Height
- Requires a 7.5″ Width x 5.5″ Height cut out in cabinet panel
CR-WMB1 Wall Mount for CR-UCM1
For use with CR-UCM1 and CR-UCW-BH Remote Chillers. Upward cantilever brackets for tighter, cleaner fit on wall. With the legs removed off the CR-UCM1, it will sit on top of the rack and is bolted from the bottom up through the leg bracket holes with 5/16-18 1″ bolts. WMB1 should be mounted to a wall with appropriate backing and bracing anchors to support the full weight of the CR-UCM1. Allow for 8″ of clearance above unit to access water bath.
CR-WMB2 Wall Mount for CR-UCM2
For use with all CR-UCM2 series configurations: CR-UCM2, CR-UCM2-S0096, CR-UCM2-2CL, and CR-UCM2-SW2. Upward cantilever brackets for tighter, cleaner fit on wall. With legs removed off the CR-UCM2, it will sit on top of the rack and is bolted from the bottom up through the leg bracket holes with 5/16-18 1″ bolts. WMB2 should be mounted to a wall with appropriate backing and bracing anchors to support the full weight of the CR-UCM2. Allow for 8″ of clearance above unit to access water bath.
CR-LBS10JG Leak Block Sensor With Auto Shut-Off
Peace of mind; protect your floors or cabinets from leaks. In-line leak detector with auto shut-off. Can be used with any Crysalli chiller system.
- Audible beep when water leak is detected
- Auto shut-off of the water at the solenoid when water is detected
- Uses 9v battery
- Auto shut-off and beep when battery needs replacement
- 3/8″ quick connect fittings
- 38″ solenoid valve cord
- Max operating pressure: 125 psi
- Max flow rate: 5 GPM
- Sensor designed to fit next to chiller unit
CR-BG2B-FF Bar Gun Two Button
Bar gun designed for fast flow dispensing of sparkling and still water. Two button configuration. 30″ long hose. Mechanical shut-off and metering controls. 3/8″ quick connect fittings. Twist off nozzle for cleaning. Comes with holster and drain assembly. For use with CR-UCM1 or CR-UCM2 Remote Chillers.
CR-WBM-4004 Flavor & Water Bar Gun
Flavor and water bar gun. Six button (four syrup, one rinse, one sparkling water) regular flow.
CR-WBM-604 Flavor Shot Bar Gun
Flavor shot bar gun. 5 button (four flavor syrup, one rinse) regular flow.
CR-804-001 Low Volume Water Boost System
Increases flow and pressure to sparkling and still water systems. Ideal for applications where dynamic water pressure to filter systems is lower than 45 PSI. Maximizes filter life on filtration systems. Self priming pump can run without damage. Eliminates water pressure fluctuation at point of dispense. Low profile allows for under counter installation. Complete turn-key package.
NSF certified components.
- Accumulator: 24 oz glass filled nylon accumulator
- Pre-charge with 40 PSI air at time of installation
- 90 PSI boost
- Max Draw Down: 10 oz
- Water inlet/outlet connections: 3/8” JG push-fit connections
- Operating temperature range: 34°-120°F
- Electrical: 115 VAC/1 Amp
- Weight: 8 lbs
- 9.84”W x 10.24”D x 4.6”H
- Install water boost prior to filtration system
CR-804-023 Water Boost System
Increases flow and pressure to sparkling and still water systems. Ideal for applications where dynamic water pressure to filter systems is lower than 45 PSI. Maximizes filter life on filtration systems. Replaceable bladder for maximum system life and simple maintenance. Self priming pump can run without damage. Eliminates water pressure fluctuation at point of dispense. Low profile allows for under counter installation. Rigid stainless steel tanks. Complete turn-key package. NSF certified components.
- Accumulator: 2 gallon stainless steel accumulator
- Pre-charge with 50 PSI air at time of installation
- 90 PSI boost
- Max Draw Down: 0.75 gallons
- Water inlet/outlet connections: 3/8” JG push-fit connections
- Operating temperature range: 34°-120°F
- Electrical: 115 VAC/1 Amp
- Weight: 13 lbs
- 13”W x 13.5”D x 9.5”H
- Install water boost prior to filtration system
CR-804-026 Water Boost System
Increases flow and pressure to sparkling and still water systems. Ideal for applications where dynamic water pressure to filter systems is lower than 45 PSI. Maximizes filter life on filtration systems. Replaceable bladder for maximum system life and simple maintenance. Self priming pump can run without damage. Eliminates water pressure fluctuation at point of dispense. Low profile allows for under counter installation. Rigid stainless steel tanks. Complete turn-key package. NSF certified components.
- Accumulator: 6 gallon stainless steel accumulator
- Pre-charge with 50 PSI air at time of installation
- 90 PSI boost
- Max Draw Down: 2.3 gallons
- Water inlet/outlet connections: 3/8” JG push-fit connections
- Operating temperature range: 34°-120°F
- Electrical: 115 VAC/1 Amp
- Weight: 18 lbs
- 19”W x 16”D x 12”H
- Install water boost prior to filtration system
CR-SDL-SSX1 Lever activated, faucet assembly
Sanitary dispense lever with stainless steel faucet. Rigid stainless steel lever, extends 1.75″ below nozzle. Self closing, spring loaded. Downward pointing nozzle. Comes with optional stainless steel tap cap. Use on custom draft towers and as a retrofit kit for CBR towers.
- Robust, stainless steel faucet design
- Integrated stainless steel adjustable flow compensator
- Touchless, stainless steel lever activated dispense
- Easy to clean
- User and maintenance friendly
- ADA friendly
- Adapts to CBR and other Crysalli towers
- Use on custom draft towers for self service use
CR-SDL-1 Universal, lever activated, faucet assembly
Sanitary dispense lever compatible with X0101-B-HEX-SC. Black speedy valve, self closing bent nozzle, hex adjuster. Standard faucet on CR-1, CR-2 and other countertop Crysalli models and the CM-V2W tower.
- Robust, stainless steel faucet design
- Integrated stainless steel adjustable flow compensator
- Touchless, stainless steel lever activated dispense
- Easy to clean
- User and maintenance friendly
- ADA friendly
- Ideal for self service applications
CR-CTAC Gas Cylinder Auto Changeover Device
Device Options:
CR-CTAC-2CK:
CO2 cylinder auto change device. Two cylinder kit, includes two 36″ hoses with check valve and tank fittings, wall bracket and CR-3741 high pressure primary CO2 regulator.
CR-NTAC-2CK:
N2 cylinder auto change device. Two cylinder kit, includes two 36″ hoses with check valves and tank fittings, wall bracket and CR-742N primary N2 regulator.
- Run two gas cylinders at one time
- Automatically switches over empty gas cylinder to new full one
- Doubles the amount of gas in use
- Can be used with 5 lbs through 50 lbs cylinders
- Great for high volume customers that can’t use bulk cylinders
- Can double the volume of smaller tanks in cabinets
- Priority Select feature allows you to designate which cylinder is considered primary
- Installation is quick and simple
- No electrical, operates with pressures
- Optimizes route planning
- Ensures a continuous supply of gas
- Reduces frequency of changing cylinders
- 6” W x 4.6” H x 2” D
- Gas service: Inert
- Inlet (2) and Outlet (1): 1/4” NPT
- Safety: Self-resetting 175 psi
- 3,000 PSI gauges
- 36” High pressure metal braided hose
- Non-electrical
CR-PC160-14-FCV Primary High Pressure CO2 Regulator
Primary Regulator for connecting to Standard CO2 Cylinders (5lb – 50lb).
- Inlet: 1/4” MPT Flare for connecting
- Crysalli CO2 hose with 1/4” flare nut.
- Includes 1/4” nylon washer for flare nut connection.
- Adjustable output psi, set screw and lock nut.
- Upper gauge shows low pressure CO2 output to equipment.
- Lower left gauge shows fill level of high pressure CO2 cylinder. “Red zone” indicator shows when cylinder is empty.
- Over-Pressure Relief valve
- Optional: CR-CTAC-2CK, Dual Cylinder Auto Changeover device
CR-S115-14FV Secondary high pressure CO2 regulator
For bulk CO2 or split system use.
- Secondary Regulator for use off of Bulk CO2 or multi-use cylinder systems
- Wall mountable
- 1/4” MPT Flare fittings for inlet and outlet connections
- Includes two 1/4” nylon washers for flare nut connections
- Adjustment output PSI, set screw and lock nut
- Gauge shows CO2 output pressure to equipment
- Use one Secondary Regulator per Crysalli unit if sharing CO2 with other equipment
CR-PN60-516BSO Primary N2 Regulator
For nitrogen gas cylinder use.
- 0-60 PSI Primary Regulator for connecting to Standard N2 Cylinder (5lb – 50lb).
- Connection: 5/16” Barb stem with shut-off valve.
- Adjustable PSI output with set screw and lock nut.
- Upper gauge shows low pressure output N2 pressure feeding equipment.
- Lower left gauge shows fill level of High pressure N2 cylidner. “Red zone” indicator shows when cylinder is empty.
- Over-Pressure relief valve
- Optional: CR-NTAC-2CK Dual Cylinder Auto Changeover device availble.
Custom Water Solutions 